The Neath River Swing Bridge is a Swing bridge over the River Neath, in Wales. It carried the former Rhondda and Swansea Bay Railway near Skewen. The bridge was constructed as a result of the Rhondda and Swansea Bay Railway Act of 1892, which aimed to provide access along the length of the river from wharves and jetties down past Briton Ferry.The River Neath Bridge has three steel approach spans on the west side and two on the east. They are of plate girder construction, and of through type, supported on piers that each consists of a pair of cylindrical columns, either of wrought iron or steel plate, which are connected by horizontal and cross bracing. The total length of the bridge is.The 180ft is pivoted centrally on a pier of six cylindrical columns similar to those that form the piers to the approach spans, but placed in a ring. They are capped by a large cylindrical drum that contains the supporting rails and the operating mechanism. The swinging span is 27ft.After many years of decline, however, the swing-bridge facility was hardly ever used. In total, it was used 14 times in 1947, three times in 1948, only once in 1949, and once again in 1956. The last operation was only for testing purposes, at the request of the Neath harbour commissioners. In recent times, the bridge suffered vandalism. A serious fire destroyed its dynamos and pumps, evidence of which is still visible in the steelwork.On 19 March 1985, the British Railways Board proposed to cease operating the swing-bridge over the River Neath, a move that was considered controversial in South Wales. The Board believed that maintaining the fiction of a swing-bridge presented BR with a cost that is no longer justified.