Top Local Places

Weltmeister Eastside

80 Railway Rd, Blackburn, Australia
Automotive Company

Description

ad

Specialising in Porsche and European car servicing, maintenance, and dyno tuning

RECENT FACEBOOK POSTS

facebook.com

Did a flex tune on this clean r34 over the last few days, nothing beats having a stock looking car making these sorts of numbers. 255rwkw on pump 98 and low boost, 301rwkw peak on e85 and high boost (video isn't of highest run obviously) #r34 #nistune #flexfuel #gt3071 #e85

Did a flex tune on this clean r34 over the last few days, nothing beats having a stock looking car making these sorts of numbers. 255rwkw on pump 98 and low boost, 301rwkw peak on e85 and high boost (video isn't of highest run obviously) #r34 #nistune #flexfuel #gt3071 #e85
facebook.com

Timeline Photos

On Friday, Colin Ironside came in for his car (S13 Silvia, rb25) to be retuned on e85. Previously his car made 230kw at the rear wheels on 21psi boost pressure, dropping to 18psi up top due to a boost tee being used. After draining his fuel tank, installing a walbro 450lph pump and filling up with e85, the difference is instantly apparent, on 2 psi more boost and with the appropriate fuelling and timing adjustment, a final result of 267rwkw was achieved, with the boost still tapering down to 18psi up top. What's worth noting is the increase in response gained. If you're interested in getting your car tuned on e85 or a flex tune allowing your car to run both 98 and e85, or just have any questions, feel free to contact us! #hks2535

Timeline Photos
facebook.com

Just a quick check on Friday to make sure every was in order for the Exe Crew weekend at Winton. Curious about what a dyno run can tell you about your car? Contact us and have a chat!

Just a quick check on Friday to make sure every was in order for the Exe Crew weekend at Winton. Curious about what a dyno run can tell you about your car? Contact us and have a chat!
facebook.com

Every so often we get a car that is an absolute monster on the dyno, and try however much we can, we are unable to strap it down well enough to get an accurate power reading due to wheelspin. Do you think your car can beat the dyno? There's only one way to tell...

Every so often we get a car that is an absolute monster on the dyno, and try however much we can, we are unable to strap it down well enough to get an accurate power reading due to wheelspin. Do you think your car can beat the dyno? There's only one way to tell...
facebook.com

Timeline Photos

We had this amazing Porsche 964 in for a service, air conditioning re-gas and general checkup today. During the test drive we noticed a slight pull to one side which we corrected with a full wheel alignment.

Timeline Photos
facebook.com

Timeline Photos

Had the privilege of running this beautiful Ferrari 308 up on the dyno today to retune the MoTeC ecu that it has fitted!

Timeline Photos
facebook.com

BMW E85 Z4 on the dyno today for a power run. Curious how much power your car makes, or whether or not it does so safely? Call/message us and book in for a dyno session!

BMW E85 Z4 on the dyno today for a power run. Curious how much power your car makes, or whether or not it does so safely? Call/message us and book in for a dyno session!
facebook.com

facebook.com

FA20 HKS 2.1L Stroker

Recent we were approached by a customer who asked us to build him a strong motor for his Toyota FT86, with the goal of turbocharging it in the near future. He provided us with a HKS stroker crank, pistons, conrods, cams and so on, and along with some supertech valve springs and retainers, we put this motor together for him.

FA20 HKS 2.1L Stroker
facebook.com

Nugget Nationals 2016 – Round 2, Dyno Day Pt. II

It was a pleasure :)

facebook.com

Impreza WRX Club dyno day

Some footage from a recent dyno day we hosted for the Impreza WRX Club Victoria, thanks to FullBOOST. Enjoy!

facebook.com

FA20 HKS 2.1L Stroker

Recent we were approached by a customer who asked us to build him a strong motor for his Toyota FT86, with the goal of turbocharging it in the near future. He provided us with a HKS stroker crank, pistons, conrods, cams and so on, and along with some supertech valve springs and retainers, we put this motor together for him.

FA20 HKS 2.1L Stroker
facebook.com

Quiz