Here is a lead valley replacement completed today. Firstly the tiles and slates are removed from either side of the valley to allow access. The old split lead is then removed. A run of felt and new lead is then dressed into the valley and the tiles and slates are secured back into place and are then pointed. We also had to straighten this valley out by re-cutting the tiles.

Unfortunately I've smashed my phone, again!! if anybody needs me or has tried to get in contact since this morning you'll have to get me on messenger until I've got a replacement.

A recent full slate to tile re-roof, completed even with these adverse weather conditions. The roof was finished with dry ridge and dry verge and a new roof window was also installed.

Another little Saturday job! Lead flashings installed incorrectly under the roof tiles. The felt had perished allowing water ingress into an electric junction box which in turn was tripping the fuse box. All back together correctly now!

A little job for the weekend. An area of slates with approx 20 broken due to the window cleaner. Area was stripped out and then slated replacing any substandard slates then finished with lead flashings across the top.

Photos from KOX Roofing's post

A full re-roof and Firestone EPDM flat roof replacement completed over the last 2 weeks! Roof stripped back to the rafters then felted, battened and tiled. Finished with dry verge, dry ridge, new lead flashings around the chimney stack and lead valley. Fortunately the weather held until completed!

Photos from KOX Roofing's post

A Firestone EPDM flat roof replacement completed a few weeks ago. Roof was stripped, rotten joists replaced, a new timber deck installed and then the rubber laid. All done with minimal mess and disruption.

Photos from KOX Roofing's post

A job for the weekend! Chimney stack dropped to the roof level and re-built along with new lead step flashings.

Photos from KOX Roofing's post

Another two flat roof replacements. Stripped, insulated, boarded and then covered using Firestone EPDM. We also replaced the timber fascia and soffit boards with PVC boards and finished the gable end with a linear dry verge system.

Photos from KOX Roofing's post

Another chimney stack fallen into a state of disrepair! Dropped to sound brickwork and rebuilt then finished with new lead flashings.

Photos from KOX Roofing's post

A chimney stack rebuild completed over the last two days. Dropped to sound brickwork, rebuilt then finished with new lead flashings plus several slates replaced whilst working in the area.

Photos from KOX Roofing's post

Another flat roof replaced using Firestone EPDM Rubber. All completed and ready for winter within a day for minimal disruption.