Doghouse Guitar Repairs
Description
Set ups,re-frets and repairs for Guitar, Bass and other fretted instruments Pro-set up: Electric & Acoustic instruments, All types of fretwork including level & dressing, partial and full re-frets. Electric and acoustic pick-up repair and upgrades. All manor of structural work including broken headstock repairs, re-glue braces & bridges, cracks and severe damage repair.
Tell your friends
RECENT FACEBOOK POSTS
facebook.comBeen re painting this for a customer......after rubbing down, grain filling, sealing, priming and base coat, it's almost ready for clear coats :-) Taken quite a bit of time, but it's gonna be worth it!! :-)
Tanglewood Acoustic came in with a nasty cracked top...after glueing the top and reinforcing the crack inside with mahogany cleats and re glued bracing, it's now having its top lacquer touched up before buffing and final Polish!!
Fender Strat came in that had had a roller nut removed and a huge acoustic nut put in its place...unfortunately this had thrown the frets out of there correct spacings and was messing up the intonation!! So I had to fill the slot with a piece of rosewood, re cut the correct slot width and cut a new bone nut ( the one in the picture is a test plastic one) I think it turned out pretty well!! And now plays in tune 😀
Think I'm gonna collapse in a heap soon!! Snowed under Doghouse Guitar Repairs today...been up since 6 am and not even half way through!! Think I better eat something......!!!
Photos from Doghouse Guitar Repairs's post
Eko Ranger Acoustic came into the workshop with a hole in the shoulder.... Being an acrylic finish,it was never going to be a invisible repair, but after selecting a piece of mahogany that was similar, I plugged, stained and re finished and polished the repair... I think it's turned out pretty well :-)
Photos from Doghouse Guitar Repairs's post
So i needed to glue a cleat to the inside of the soundboard of an acoustic guitar with a hole in it!! It was in an unreachable position, so i fashioned a winch from a dremel router base, a piece of hook up wire an old drumstick and a clamp :-) really pleased with the result!! Once its dry i can glue in the spruce plug....match the colour and drop fill it with lacquer! Been an interesting Sunday morning!!
Acoustic Headstock Repair
Photos from Doghouse Guitar Repairs's post
Here's the finished refretted Rickenbacker!! Fret's have been levelled re profiled and buffed along with the new laquer on the fingerboard which is now nice and glossy :-) I've Just put a new set of strings on and set it up for the new wire, and is now ready to finally leave the workshop!!
Photos from Doghouse Guitar Repairs's post
Temporary spray booth constructed.....Rickenbacker masked off!! Now for 9 coats of gloss lacquer on the Rick fingerboard 🙂
Photos from Doghouse Guitar Repairs's post
Whitfill Custom Tele Refret
Photos from Doghouse Guitar Repairs's post
This guitar lacquer is pretty nasty stuff..! But my new mask is boss.. Just a couple more coats to do on this neck repair 😀