Photos from 阿丹模型工作室 DS Modelling Academy's post

處處讓我頭痛的馬王儀表板與方向盤的部分快告一段落了，下一步～ The ming boggling LaFerrari dashboard unit and steering wheel is pretty much done, next~

Timeline Photos

今天的空檔來處理馬王儀表板，之前儀表板處理了碳纖維表面，現在又要塗裝它那一片紅色地帶，田宮呀田宮不要一整片儀表板一體成型可以做些細節分件吧，真是遮蓋到KB耶 >_< For today we gonna update a bit on the dash panel, before this I have done the carbon effect on the same dash panel already, now going to airbrush the red parts of the panels, come on Mr Tamiya, instead of doing the whole piece of the dash panel all in one could you please separate the small details into other pieces that would have made it so much easier to work on, just to mask the panel for the red area to be airbrushed was a real pain in the ass >_<

阿丹模型工作室 DS Modelling Academy

TamiyaUSA

田宮的新1/24NSX車模套件真是叫人期待啊~ Can't wait till we get our hands on the new 1/24 NSX kit from Tamiya~

Photos from 阿丹模型工作室 DS Modelling Academy's post

For English please read on... 這組田宮馬王模型套件製作到此覺得有些不滿意的地方是引擎室裡的油電系統的高壓電纜（橘色）還有AC/DC電流整流器的相關細節田宮是直接略過。 馬王在電力系統足夠電的狀況下是藉由它 HY-KERS 系統輔助才能從原本內燃機動力輸出800匹瞬間提升到變態等級960匹。 模型做到這裡覺得還是要添加一下套件沒有的細節。我常跟學員們說模型做完不要的框架與廢料多少留一些，今天跟各位分享的是參考網路真車引擎室的照片來自製電流整流器，這就是運用廢料製作的，接下來就是高壓電纜與塗裝嘍～ Building the Tamiya LaFerrari up till now I noticed that the Hybrid system details like the AC/DC convertor unit and High Voltage cables were all missing from the engine bay which in my opinion affects the realism of the finished model and the kit doesn't have any of these details at all, bummer~ The LaFerrari's internal combustion engine cranks out 800 hp and with its hybrid system called HY-KERS the total output exceeds 960 hp, having this said I couldn't help but wanting to add my own details.. I have been telling my students that after your models are completed always keep some of the waste parts tree and other things you can find or salvage for later use. For todays wip I'm making a AC/DC convertor unit from those waste parts tree bits and some left over bits of aluminum rods, with this done can move on to making the hybrid cables and painting...

Timeline Photos

For English please read on... 那天GBWC決賽交件日的歡迎派對跟各位在分享時間提到還沒開始製作「傳說」作品的初稿鉛筆筆記描繪, 想到就記下來作品製作就會有個很好的起原點喔～ 也許只有我看懂自己的黑白隨性塗鴉哈哈^_^ During the GBWC finals hand in day during the welcoming party sharing session I have mentioned the rough sketch of how I wanted my project to look before I have even started, this is what I normally do when I have an idea flashing through my mind and thus I can start my project with this starting point... Maybe I'm the only one who can understand my own scribble haha ^_^

Photos from 阿丹模型工作室 DS Modelling Academy's post

For English please read on..... 今日終於能抽個空跟各位介紹一下今年2016 GBWC 參賽作品 今年的作品的小檔案： 作品名稱：傳說 製作時間：約4個月 使用套件：萬代MG海牛，龍的部分採用 RE/100 夜鶯與鐵血 1/100 Grimgerde, 大比例三國傳劉備，三國傳SD系列 鋼普拉以及部分自製零件 作品構思主軸：將台灣的文化點滴融入今年參賽作品裡 作品介紹： 雖然離開台灣20幾年但是阿丹還是很懷念台灣各式各樣的文化,特別是美食文化（如果算得上的話）哈哈～ 小時候母親有時會帶我去行天宮拜拜祈福，當時才知道在台灣信徒們所拜的神明是「關聖帝君」在一千八百多年前的三國歷史中真有其人，「關雲長/關羽」他的忠義精神與劉關張三兄弟結拜的情義能流傳這些年真是不簡單！ 今年GBWC的比賽一直希望能融入一些台灣的文化所以很自然的有一天腦海裏浮現出關公與龍的作品想法也很快就運用鉛筆與筆記本描出作品的樣貌。作品是想將關聖帝君 的「帝」與「龍」作為結合，名為「傳說」希望能給觀看者更多的想像空間。場景的部分是關公與龍在水面上的翱翔。 其實阿丹不太喜歡跟隨著潮流做作品，自己喜歡怎麼製作就以自己的想法與製作方式實體化。關公與龍的裝甲雕刻出雲圖花紋，塗裝的部分想營造出金屬在化學處理下可呈現出不同色彩變化的效果。 以上是今年我們GBWC的參賽作品介紹, 作品本身會與其他決賽作品在內湖美麗華1F展出到9月18號的禮拜天，有興趣的朋友們還是要去現場看看今年所有決賽作品喔，參觀作品是無料的喔，FREE~~ PS: 在其中一張照片裡故意放了個打火機是給沒看到實體作品的朋友們參考的，因為之前有國外的網友說我作品的龍是用SH假面超人其中角色的零件製作的，別想太多啦 >_< 謝謝各位 ^_^ Finally can get a break to introduce our 2016 GBWC Taiwan finalist entrant "The Legend" Short project info: Project name: The Legend Build time: around 4 months Project consists of: MG ka Hi Nu Gundam, the dragon consists of RE/100 Nightingale, 1/100 Grimgerde, The Three kingdom series Gunplas along with self-made parts Project highlight: To introduce part of our Taiwanese culture into the project Project introduction: Dennis has left Taiwan for over 20 years and is always fascinated by Taiwanese culture especially the food culture here haha~ When I was still a kid in Taiwan my mum used to take me to the "Xingtian Temple" in Taipei to pray for good luck, and from then on I knew we were praying to GuangYu who he was a glorious military general more than 1800 years ago back in the Three Kingdom era, he was best known for his supreme loyalty to his step brothers and the justice role model that he played during his lifetime. GuangYu's legacy and good deeds were being told and passed on from generation to generations throughout most parts of Asia and was regarded as a god after his death for more than 1800 years ago. On a side note for all the Gunpla fans who doesn't know GuanYu, Bandai has released "Brave Battle Warrior" Series SD Gunpla kits, and you will find a couple of nice GuangYu kits in their line ups.... This project is a dedication to Guangong, the god that started as a historical figure as GuanYu whom I can feel looked after me after returning back to Taiwan 6 years ago with most of my prayers answered so didn't take long to come up with this year's GBWC project idea, one day had an idea going through my head and with a pad and pencil started with a initial sketch of GuanGong riding the dragon low flying pass on the sea surface and the project was started from there... I'm not a big fan of following the building trends or building techniques that are hot on the web, rather just build it the way I like and how I like it to look. The armors both on GuanGong and the dragon were hand carved with cloud symbols and patterns along with airbrushed special effect to mimic metal as a result of chemical treatment.. The above is the description of our 2016 GBWC Taiwan finalist entrant, if you guys are interested and happen to be in Taiwan this week, you can check out all the finalists work display at Miramar mall 1F in Naihu Taipei until September 18th and its free of charge~ PS: You guys are more than welcome to share the work if you like it, but please..... use our fan page link, do not simply copy photos and paste share on a new post, as I don't want the project photos to float around with no descriptions at all. Thank you all in advance for this matter ^_^ By the way on one of the photos I have deliberately included a cigarette lighter for size comparison, coz one of the guys on the web was commenting and arguing that the dragon was built using the SH Kamen Rider parts, that guy can keep on guessing with what he only knows.. I'm not a fan of Kamen Rider nor I have watched any episodes of Kamen Rider or collected any related SH figures, this GBWC project has nothing of that sort involved in the build.. Thank you ^_^

Photos from 阿丹模型工作室 DS Modelling Academy's post

謝謝每年都會到現場支持我的愛麗絲阿姨幫我拍攝這次GBWC決賽歡迎派對的分享時刻的照片。。也要謝謝美麗動人的主持人讓我不會在台上緊張。。 Thanks to Anty Alice whom has always been supporting me at GBWC competition since 2014 and for the photos of my sharing session during the welcoming party today... Also wanna thank the beautiful event hostess for the event interview..

Ping's Workshop

2016 GBWC 台灣 決賽作品照片，謝謝之平的分享^_^ 2016 GbWC Taiwan finalist works all category, thanks to Ping for the photos^_^

Photos from 阿丹模型工作室 DS Modelling Academy's post

For English please read on, thanks^_^ 今天順利的將我們今年GBWC台灣區決賽入圍作品「傳說」交件了，今年所有決賽作品都看的很過癮也感受到大家對作品的用心^_^ 有興趣的朋友們還是建議去現場觀看作品本尊，畢竟現場看才會看到每件作品的細節與真實感。今天也很榮幸能上台跟各位分享一下阿丹與模型製作以及參賽經歷，謝謝川口名人老師幫我的PB收藏簽名，我會好好的珍惜它們的^_^ 有興趣的朋友們可以去內湖美麗華ㄧ樓參觀各件決賽作品，一直會展示到下禮拜18號頒獎典禮那天結束～ Today we are pleased to announce that we have handed in the our 2016 GBWC Taiwan finals competition work "The Legend". This year is a special year for all of us in Taiwan with almost 600 pieces of Gunplas being built for the competition event and it wasn't easy to get into the finals this year. To see all the finalist entrants together we were happy to see many different styles of work being presented this year and all the best for the finalists. I was honored to be on stage talking about Gunpla building and experiences both as a builder and a competitor.. Big thanks to Kawaguchi Sensei for autographing my PB collection where it will be much treasured for years to come ^_^ For those who are interested to check out the finalist entrants works, they will be displayed at Miramar mall 1F in Neihu of Taipei until 18th of next week where the prize giving will take place...

Photos from 阿丹模型工作室 DS Modelling Academy's post

馬王的V12心臟整體就快要完成了，覺得有些細節部份還是需要而外添加一下^_^ The V12 power house is almost complete, some more minor detailing is needed still ^_^

Photos from 阿丹模型工作室 DS Modelling Academy's post

原本套件座椅是在銀色框架上，還是要經過塗裝流程才能得到希望的紅色。別看那座椅邊緣一條條的小黑線很容易，還是得要花點心思喔^_^ The seat parts were molded in silver and it was necessary to go through some proper painting steps to get the red that I wanted, also to mention It's not all that easy trying to detail the seat edges, still needed bit of planning to get it right ^_^